Application：
Masking protection
Structure：
Film / Liner
Thermal Release Adhesive
PET Film
Features：
The thermal release layer will stay adhesive until heat is applied over a relatively short amount of time, at which point it can then be easily removed without much effort.
Properties：
|
ITEM # (Click for datasheet) |
Temperature |
Color |
Adhesive Strength (g/25mm)*1 |
Thickness*2 |
|
|
(℃) |
Normal |
Post-heat |
(μm) |
||
|
100 |
Red |
700 |
30↓ |
150±3 |
|
|
120 |
Yellow |
750 |
30↓ |
150±3 |
|
|
120 |
Blue |
1600 |
40↓ |
150±3 |
|
|
120 |
Green |
500 |
20↓ |
150±3 |
|
*1 Adhered to 25μm PET film, processed at the rate of 300mm/min, with 180° peel off.
*2 Substrate thickness: 100μm, the total thickness measured without the releasing film/liner